Search
CAM CLEAN / RK805BX00
Compact and lightweight chest ascender for safe and smooth ascent, rescue and special rope techniques

  • simple and quick manipulation
  • for dynamic and low stretch ropes
  • lower hole angled to keep flat position on a harness
  • stainless steel toothed cam for higher corrosion resistance and for any conditions (frozen or dirty ropes)
  • upper hole for attaching the PULLER shoulder strap to keep the rope clamp in a correct position
  • trigger with a short descent feature
  • marked with an unique number
For use with ropes of diameter 8 - 13 mm:

  • according to EN 12841 ......... with a static rope Ø 10 - 13 mm
  • according to EN 567 ............. with a rope Ø 8 - 13 mm
Videos:


  • fixation of the CAM CLEAN chest ascender (older design) on EXPERT work harnesses


  • fixation of the CAM CLEAN chest ascender (older design) on PROFI WORKER work harnesses
  • recommended maillon BIG D or BIG DELTA (EN 362)
  • this chest ascender fixation system is also applicable with TECHNIC and ANTISHOCK I work harness
Colorblack matt
Weight125 g (4.4 oz)
Materialbody - light alloy, cam - stainless steel, trigger - plastic
Max. diameter of rope13 mm
ce 1019 EN 567 EN 12841 type B

Download

catalogue sheet PDF - 1,0 MB
instructions of use PDF - 1,0 MB
Activities at height such as climbing, via ferrata, caving, rappelling, ski-touring, rescue, work at height and exploration are dangerous activities, which may lead to severe injury or even death. This the following is essential before use:
careful reading and understanding of the instructions for useacquaintance with the possibilities and limitations of the productadequate apprenticeship in appropriate techniques and methods of useunderstanding and acceptance of the risk involved
In case of doubt or problem of understanding, contact SINGING ROCK.